Construction equipment, building supplies Maharashtra ads Maharashtra, Construction equipment, building supplies classifieds Maharashtra, Construction equipment, building supplies free ads Maharashtra, ads for sale Maharashtra, ads to buy Maharashtra, FREEADS in India Page number 5-1

Pumping CLC is performed easily peristaltic pumping equipment due to the lubricating effect of the bubbles in the concrete mix. Advantages: • No Seal, • No valve, • Self Priming, • Can Run Dry without Damage, • No Noise, No leakage, • Time Saving, Fuel Saving, • Energy Saving, Minimum.

We offer conveyor belt for Fly Ash & Cement..

Features: • Heavy Duty Motor – withstands voltage fluctuations From 180 V to 240 V • Deep fined Aluminum Alloy specially designed to keep temperature low and to minimize formation of carbon • Special Stainless Steel Material for high resistance, high efficiency & self floating • Compact.

This item is customized to meet requirement of wide range of Electrical Panels which are used in different applications and are available as per the needs. Features: • It having Push Button For ON/OFF motor , Conveyor • Mains Voltage Measuring Meter and Indication • Inbuilt Motor Starter, • Over.

We offer high quality of CLC Mould, which is used to make Bricks and Blocks. It is designed in compliance with International Standards using best class of raw materials under the guidance & supervision of skilled professionals. To meet the varied requirements of clients, we offer CLC Mould in diverse sizes.

Foam producing substance is called Foaming Agent, which is used in the manufacture of cellular concrete. This is a fully biodegradable protein-based concentrate, and when diluted in water and poured in Foam Generator and compressed with air, fine foam is generated and forms stable bubbles, which provides necessary porosity to the concrete.

Avail from us a precision engineered range of Concrete Cube Mold that is widely used for cement testing purpose. This equipment, especially designed and fabricated for testing of the cement is ISI Mark (IS:10086) and ensures complete hassle free performance. Our clients can place an order for this equipment with us in their specifications and we promise to make this product available to them at highly competitive prices.

Celebrating 10 years of excellence, Excelize.com has been consistently providing top class Building information modeling services to global clients. Detecting clashes, accessing critical data and reducing error is all possible now; all thanks to our expert MEP BIM services and drawings for MEP contractors.

Finely grind aluminium powder is used in very limited quantity (less than 0.5%) so that it reacts with active lime, and silica in base material to make the aeration, and swell the product, making it very light weight product..

Application: RCC Repairs Steps Repair of water tanks Repair of balconies and window sills Repair of bridges, tunnels.

Structure Guard is ready to use free flow high strength cementitious material for repairing of beams, columns, and slabs..

Rainguard is an Elastomeric polymer with the property of viscoelasticity (elasticity), generally having notably low Young’s modulues and high yield strain compared with other materials..

Heat Guard contains highest quality of Resins combined with insulating and reflective fillers. It is a bright white elastomeric coating having high reflectivity to sun rays, hence keeping Interiors cool during hot summer months..

A highly effective water-reducing agent & for free flowing concrete Advantages: Up to 20%-25% water reduction.. Early demoulding/deshuttering. Increased water-tightness..

high strength hardener for CLC Blocks/Paver Blocks. Advantages: Early demoulding/deshuttering. It increases the strength..

We are engaged into offering high quality glossy Lacquer coating. Advantages: Highly Glossed. Protective sheet against harsh conditions..

GCCPL is the manufacturer of protein based foaming agent concentrate, used to make the light concrete or foam concrete. First it is to diluted in water and then foam is produced in a concrete foam generator with compressed air. Gubbi Constro Chem Pvt. Ltd. Are manufacturers of construction Chemicals.

We are Manufacturer & Supplier of ISI Safety Helmet in Yellow, Green..

We are engaged in manufacturing and export of Auto Level Equipment that is an ideal choice for surveying and engineering level applications hence obtaining correct accuracy levels. Features Robust construction Ensures complete accuracy for years under severe conditions Available in different models Provided with durable Lithium battery Ensures easy adjusting features Available in Aluminum telescopic tripod stand Includes hard-shell carrying case with dual latches, plumb bob, Allen wrench, adjusting pin, and instruction manual Ensures accurate levelling Portable.

Laboratory Concrete Mixer (Motorized) Our concrete mixer laboratory type is electrically operated are is designed to remove the burden- some work of hand mixing. We assure that these thoroughly uniform mixed batches are produced by us. In this, the counter balanced drum is easy to tilt 1.1/2 to 2cu.

The Vibrating Table is used for compacting concrete cubes and cylinders. Salient Features Specifications: It is designed to carry a load of 140 kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top.

We are one of the most trysted manufacturers and exporters of a precision engineered range of Moisture Measuring Meter that is used for measuring the moisture content in many substances such as wood and concrete. This non destructive type testing equipment is also used in measuring the moisture content of a building material and measure up to a range of 35% of moisture content.

We offer Vicat Needle Apparatus that is widely used in determining the normal consistency and setting time of cement. The test is undertaken by mixing cement with water and then measuring its resistance to penetration of a standard probe at varying intervals of time, until a certain value is reached..

We understand the fact that the strength of concrete is a very important aspect during construction, so we are offering compression testing instruments. Strength of any concrete is attained by crushing the specimen through cubes or cylinders. Our compression testing machine consists of Load Frame with suitable platens and a Pumping Unit with Pressure gauge, either had operated or electrically cum hand operated.

Backed by sophisticated infrastructure, we hold ability to manufacture and export best quality tile abrasion testing machines. These machines are extensively used for determining the resistance to wear for cement concrete flooring tiles. They are oad the specimen. The abrasion of tiles is measured on a thickness gouge specifically made for this purpose.

Our range of Sieve Shaker Machine is ideally suited for carrying out sieve analysis of different materials in dry conditions. Fabricated out of cast iron, the body of this machine is very robust and apt for functioning in the harsh conditions as well. Further, the base is made of M.S. Sheet, which ensures resistant to corrosion and the top rotating plate is constructed of cast aluminium complete with arrangement for fixing 8"/20 cm or 30 cm dia sieves with lid and receiver.

Test Sieves are used for sieving of aggregate, sand soil and cement etc. These sieves are manufactured as per various standards like ISS, BSS, ASTM, DIN etc. Sieves are made of Brass frame and G.I. frame of dia. 200mm, 300mm & 450mm. Normally Brass Sieves are manufactured in 200 cm dia and frame is spun brass, joint less.

We are manufacturers and exporters of Slump Cone that finds application in determining the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38 mm. This equipment consists of one slump cone with handles and foot pieces and ensures hassle free performance at all levels of operations.

For casting, concrete specimen for flexure tests Specification : Made of Cast Iron / Mild Steel. The mould are made of 4 plates assembled together. Each mould is supplied complete with base plate. Faces are machined flat to ± 0.2mm. And finished in size to 0.2mm. 10 CM X 10CM X 50CM 15CM X 15CM.

For testing concrete cylinders for compressive strength tests. Specification : The moulds is split vertically into two parts. The mean internal diameter in within /-0.2mm and height is within /-1mm. The ends are machined to /-0.05. The base plate and top plate are machined flat to /-0.03mm. Mould cylinder, cast iron, 15cm dia x 30cm height.