Industrial Machinery Maharashtra ads Maharashtra, Industrial Machinery classifieds Maharashtra, Industrial Machinery free ads Maharashtra, ads for sale Maharashtra, ads to buy Maharashtra, FREEADS in India Page number 7-1

Specimen Cutting Punches And Press Dumbbell Specimen Cutting Punches and Press are usually used to cut a dumbell shaped specimen from a sheet of rubber or plastic having thickness upto 3mm. These are manufactured as per ASTM, ISO, IS BS or any other standard as required by the customer. The material of construction is High Carbo High Chromium Steel, Hardened to RC-60/62 for better life of cutting edges.

Its Features are Reduces Engine Sludge, Polished Billet Aluminum Housing, Includes 36" Rubber Hose and Fittings, Easy Installation, Fits 2005-2010 Mustang GT. Reduce Sludge. Reduce engine sludge in your 4.6 by diverting nasty "blow-by" (a combination of exhaust gases and oil) into a Oil Separator a.

These dryers are used for instrumentation and process applications as well. Some applications are, CNC machines, CMM machines, Spray painting, Nitrogen generators, laboratory air & gas applications, powder coating, etc. Main Features are: Dew point achieved - 40C compact and can be mounted on wall Low power consumption Light weight Aluminum construction, no rusting Specially graded desiccants for optimum performance Equipped with pre filter & internal post filter.

HOT SET TEST OVEN AS PER IS 10810 PART – 30 It is an oven with an arrangement to hang the dumbbell shaped sample inside the oven with a set of weights which can be hanged at one end of the sample. Pointers are provided on the gauge marks on the sample and elongation of gauge length in 20 minutes is measured with the help of a scale fixed inside the oven just near to the sample.

Round Hot Plates are fitted with a cast iron platform with energy regulator, digital temperature control module and a working voltage. Temperature is controlled by a three position rotary switch. We manufacture these by using high quality cast iron and stainless steel. These products are widely used in various industries and sectors for different applications.

Compressed air driven vacuum ejectors find a wide use in the industry due to the easy availability of Compressed air which acts as a motive medium in these ejectors. These devices are extremely reliant, and highly compact in size. Compressed air over a large range of pressure and temperature. In fact higher the available compressed air temperature lower will be the flow requirement, thus eliminating the need for an after cooler in a compressed air system.

Rectangular Hot Plate is fabricated using mild steel or highly polished stainless. The body is made up of thick mild steel and duly finished with powder coating. The heat is controlled by three position rotary switch and is offered with an indicator lamp for mains. Temperature is controlled by energy regulator.

Refrigeration dryers employ two heat exchangers, one for air-to-air and one for air-to-refrigeration. The compressors used in this type of dryer are usually of the hermetic type and the most common gas used is R-134a and R-410a for smaller air dryers up to 100 cfm. Older and larger dryers still use R-22 and R-404a refrigerants.

Constant Temperature Water Bath is mostly used in Medical, Educational Institution, Bio-Chemical Industries, Research laboratories and various other industries. This has a double walled construction, and its inner chamber is made of stainless steel and outer chamber made of mild steel. They are fabricated using premium quality materials that are tested for their durability.

We offer Modular electronic weighbridge which facilitates light commercial to extreme heavy duty vehicle weighing email:marketing@bizerba.in.

Features : Vacuum Ovens are double walled. Inside Chamber is made of thick stainless steel 304 Quality. Outside chamber made of mild steel sheet powder coated High grade glass wool insulation between the chambers to avoid heat loss. Uniform drying under vacuum. Temperature controlled by digital temperature indicator cum controller Vacuum chamber is wrapped with high quality heaters for quick and uniform heating.

It is light weight and fast heating equipment. Most Useful for Ashing, Fasions, Lgniting and heat treating of small parts in chemical, industrial fields, colleges. Out side body made up of heavy gauge M.S / G.I duly powder coated Inner muffle with high temp. insulating material Maximum Temperatures 10000C / 12000C & working temperature 9300C / 11300C Temp.

E.S.C.R. Apparatus is used for determination of suceptibility of ethylene plastics to environmental stress cracking when subjected to certain conditions. Bent specimens of the plastics each having a controlled imperfection on the surface are exposed to the action of a surface active agent, oils or detergent.

It is usable to estimate the Melting Point of chemicals, Pharamaceuticals, Food Etc., This is very useful to determine the melting point if any subsatance. Max Temp. up to 3500C. Consist with aluminium cylindrical block for heating, Radial holes admits a thermometer and glass capillary. Temp. Controlled by energy regulator.

VICAT SOFTENING TEMP. (ASTM D1525) : Determination of the temperature at which a standard indenter penetrates 1mm into the surface of a plastics test specimen under one of the loads specified under uniform rate of heating. DEFLECTION TEMPERATURE OF PLASTIC UNDER FLEXURAL LOAD ( As per ASTM D-648) Determination of temp.

To determine the amount of halogen acid gas evolved during combustion of compound based on halogenated polymers & compounds containing halogenated additives, taken from cable insulation and outer sheath. 1.Tube Furnace 2.Electronic digital temp. Indicator K controller up to 10000c 3.Quartz Tube 4.

Density of smoke from the burning or Decomposition of plastics is measured. This test method describes the measuring and observing the relative amounts of smoke obscuration produced by the burning or decomposition of plastics. It is intended to be used for measuring the smoke producing characteristics of plastics under controlled conditions of combustion or decomposition.

Izod Impact Tester - Charpy Impact Testers AS PER ASTM D 256 " Facility is provided for Computer Interface." The resistance to breakage by flexural shock of plastics and Electrical insulating materials as indicated by the energy extracted from standardized pendulum type hammers mounted on standardized machines in breaking standard specimens with pendulum swing.

This instrument measures the rate of extrusion of Molten resins through a die of specified length and diameter under prescribed conditions of temperature, load, piston position. SPECIFICATION : Instrument with following accessories will be supplied Digital stop watch, Temp. Controller ( PID ), Piston, Orifice remove, Barrel Cleaner, Orifice Cleaner, Scoop, combined weight of 2.

ELECTRO-HYDRAULIC UTM WITH DIAL DISPLAY AND AUTOGRAPHIC RECORDER. Shanta Universal Testing Machine are hydraulically operated. Series SE-UTN is manually controlled with Dial display. Dummy Pointer is provided to register peak load. Autographic recorder is attached to machine that gives Load-Displacement curve on a continuous chart paper.

The Precision CNC Machining process is more precise than manual machining india, and can be repeated in exactly the same manner over and over again.Because of the precision possible with CNC Machining, this process can produce complex shapes that would be almost impossible to achieve with manual machining.

We have deep expertise in providing best CNC Machining India Services. Professionals keep themselves up to date with changing technology and offer best services. In addition to this, these presented services are satisfying and accomplished by professionals by showing lenient behavior to patrons. Precision machining requires acute understanding of the critical aspects of the manufacturing process such as: • Work-holding • Tooling • CNC Programming • Finishing Operations The CNC machines Redline have in-house have been carefully chosen to compliment the type of precision CNC machining and manufacturing that they have chosen to specialize in.

The two column frame with a hand wheel operated lead screw is a perfect tool for tension, compression and flexural testing of springs, rubber, paper, film etc., with apt attachments. These are appreciated for their durability, accuracy of results and high tensile strength. It is a better Tensile Tester Machine having variety of applications.

MAIN FEATURES : - Selection of different speeds by pulley belt system - Facility to mount different load cells. - Facility to mount various grips / fixtures for different tests and materials like rubber, plastics, cables, leather, paper, plywood and metals For more info.: http://www.tensiletestingmachineutm.

Freezers actually work best when they are full. The more frozen stuff inside, the less work the compressor has to do to make sure everything stays frozen. It's like frozen items create their own insulation. Freezers, however, shouldn't be so full and packed that you can't get to anything. Every once in a while, it's a good idea to think about how you use your freezer, clean it out and start fresh.

Humidity Chamber provided are highly demanded and applauded by our esteemed clients all over the globe. Excellent in quality, user friendly, economical, durable, reliable, corrosion proof are some of the positive attributes of the offered range. Moreover, we source these range from certified manufacturers after thoroughly inspecting each of the charger on various predefined standards.

Multi Cell Ageing oven is used to determine the thermal effect on the mass of thermoplastic insulation and sheath. It is electrically operated and thermostatically controlled heating oven with controlled air flow.The air enter the oven in such a way that it flows over the surface of the test pieces and leaves near the top of the oven.

E.S.C.R. Apparatus is used for determination of susceptibility of ethylene plastics to environmental stress cracking when subjected to certain conditions. Bent specimens of the plastics each having a controlled imperfection on the surface are exposed to the action of a surface active agent, oils or detergent.

Dumbbell Specimen Cutting Punches and Press are usually used to cut a dumbell shaped specimen from a sheet of rubber or plastic having thickness upto 3mm. These are manufactured as per ASTM, ISO, IS BS or any other standard as required by the customer. The material of construction is High Carbo High Chromium Steel, Hardened to RC-60/62 for better life of cutting edges.

It is an oven with an arrangement to hang the dumbbell shaped sample inside the oven with a set of weights which can be hanged at one end of the sample. Pointers are provided on the gauge marks on the sample and elongation of gauge length in 20 minutes is measured with the help of a scale fixed inside the oven just near to the sample.