|
Water jet ejectors are available that can economically handle a nominal amount of air leakage in vacuum equipment along with a large condensable vapor load. Water pressures as low as 10 to 20 psig will sustain a moderate vacuum while water pressures of 40 psig and higher will efficiently sustain a vacuum in the range of4.0 inches to 1.0 inch Hg. Abs. pressure with a single stage ejector depending on the load to the ejector and the temperature of the motivating water.
The water jet ejector serves both as an intercondenser and a final stage to the ejector system. In instances where the non-condensables entering the ejector system are small compared to the condensable vapors, say 10 percent by weight non-condensables or less, the water jet ejector can take the place of a two stage ejector in maintaining a suction pressure of 3 inches to 2 inches Hg. Abs. to which the steam jet ejector can discharge.
Crystal TCS has committed itself to continued research in the field of its applications which has helped us to be coherent with the markets. We ensure an efficient product life-cycle experience to our Clientele not only by precise and quality products but also through equally competent after-sales services.
For More Information Please Contact us or call on +91 253 2501600
http://www.crystaltcs.com/vacuum-systems.php
|
